Civil-Comp Logo
Civil-Comp Press
Computational, Engineering & Technology
Conferences and Publications
 

Cagliari, Sardinia, Italy
Venue: THotel, Cagliari, Sardinia
Railways 2016
The Third International Conference on
Railway Technology:
Research, Development and Maintenance
Cagliari, Sardinia, Italy
5-8 April 2016

Special Session Call for Papers:

Special Session: RW2016-S08
Wheel-Rail Damage: Influencing Factors and Metallurgical Aspects
Session Aims and Scope

The wheel-rail contact represents the interface between the railway infrastructure and the rolling stock. Several damage mechanisms on both rails and wheels originate at this interface, causing high maintenance efforts and costs. An important driver of damage mechanisms is the dynamic character of the loading at the interface, depending on vehicle and track properties. The development of damage in time is also strongly influenced by the material properties of the wheel-rail contact system.

This session aims at a deepening of the understanding of phenomena acting in the wheel-rail interface, affecting the structural integrity on a longer term. The question is: what are the main influencing parameters in wheel-rail damage and how can the development of damage be predicted reliably?

The session should bring together researchers and experts from several fields presenting their work and experience on wheel-rail damage, and will cover, but not limited to, the following topics:

  • Experience from operation: influence of wheel-rail material, rolling stock, grinding strategies, line routing, friction management, climatic conditions, etc. on wheel-rail damage (wear, head checks, squats, corrugations etc.)
  • Experimental results from vehicle tests and test rigs: influence of wheel-rail material, loads, contact conditions, etc. on wheel-rail damage
  • Rail surface topology and morphology
  • Wheel flats and other geometrical imperfections
  • Prevention and detection techniques for wheel and rail defects
  • Prediction models for crack initiation, crack growth, wear and plastic flow
  • Interaction between wear and rolling contact fatigue (RCF)
  • Validation and application of prediction models
  • Accounting for wear and RCF in Track Access Charge models

Organisers
For specific questions regarding the scope of this session please contact the organisers:
  • Dr M. Steenbergen, Delft University of Technology, The Netherlands (M.J.M.M.Steenbergen AT tudelft.nl) and
  • Dr K. Six, Virtual Vehicle Research Center, Graz, Austria, (klaus.six AT v2c2.at)

Please note that papers that are found to fall outside the scope of this session may be considered for other sessions.

Abstract Submission
To submit abstracts for this special session, please follow the normal abstract submission procedure but please select "RW2016-S08" when asked "Is this paper part of a special session?"
Continue: Call-for-Papers